home *** CD-ROM | disk | FTP | other *** search
- Path: news1.relcom.eu.net!izhmar!not-for-mail
- From: Alexei.Chizhoff@online.mark-itt.ru (Alexei Chizhoff)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Help! Dead Zorro!
- Date: 3 Feb 1996 23:14:16 +0400
- Organization: Myself
- Sender: tns@jaguar.mark-itt.ru
- Message-ID: <4f0c68$7e0@jaguar.mark-itt.ru>
- NNTP-Posting-Host: jaguar.mark-itt.ru
- Keywords: Zorro slots are dead!
- X-Newsreader: TNSDrive v1.1 [BSD/OS] jaguar.mark-itt.ru
-
-
- Hi, there!
-
- I have an A4000 with Cyberstorm 060/50 accelerator board
- and CyberSCSI module. This part of my systme works fine but
- today I released strange problems with ZORRO slots. There
- were always problems with ZORRO III - I had 'dead' DKB 4091
- and then CyberVision 64 boards without any reasons (Buster
- rev. 11 is now socketed and A3640 was rev. 3.1 - it's
- enough with luck for good working). But now something
- mysterious happen - ZORRO II cards became 'dead' for system
- too. I have VLAB MOTION and TOCCATA - both cards are good
- tested! Motherboard is marked as Revision D of Commodore.
-
- Symptoms: I can't see any expansion boards anymore and they
- won't work. Flicker Fixer AGA works (visually) but
- any ZORRO card not exist for the sustem. BTW if I
- see system with SHOWCONFIG command they say that
- processor is 68040 with 68040 FPU (?).
- All boards working not in any configuration: single
- or simultaneously.
-
- Please, help me if you can! My friend from PC side says that
- something like this is very usual with 486 motherboards. Is it
- possible that my motherbord works like 'cheap' PC milkbrothers?
-
- Thanks in advance,
- Alexei.Chizhoff@online.mark-itt.ru
-